Position:Home > Support > FAQs > PoE Camera Systems

Q49. What should you do if the camera's time difference is not function well?

A: Sync each POE camera's time

1. Make sure your NVR connected to the same LAN as your PC.

2. Download the PC software “IPCTool” blob.png  , open it, click “refresh”blob.png, it will find the camera's IP which you connected to the NVR.


The link of Software “IPCTool”.

http://www.anran-cctv.com/downloads/showdownload.php?lang=en&id=35


MetInfo enterprise content manager system | MetInfo CMS


3. Double-click the IP address of the camera that was searched, then you can login to your camera and set the camera.

blob.png

1511228328214513.png

blob.png

4. Please right click mouse--Add camera, as below picture shows,

blob.png

blob.png



B: Synchronize the time of the NVR system

1. Please go to NVR and right click mouse--Main Menu--System--Network and find the NVR's IP address

blob.png


2. Open the browser and login to the NVR's IP address (We recommend using IE browser), you can adjust the time.

1512184367838947.png

1512184473474683.png

1512184513274585.png

It's important: You also need to enable NTP

1526610355109468.png1526610406106163.png