Q07.How to install a hard disk drive?

There are several requirements of hard disk drive (HDD)

1. The disk had better be the one used for survilliance, not for computer use.

2. The type should be SATA. SATA2(3GB/s) or SATA36GB/sis recommened. If you connect a USB stick or drive to USB port of DVR, DVR can back up video from internal hard disk drive to USB stick, but can't record to USB stick directly.

3. We recommend 5400 RPM.

4. size is 3.5” .

5. The capacity should be less than or equal to recorder's maximum capacity.

Note: Before installing the hard drive disk, please power off the system if it is on.

Step 1 Loose the five screws which are fixing the box cover.

MetInfo enterprise content manager system | MetInfo CMSMetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS
Step 2 Push forward the cover to the end and remove it.
MetInfo enterprise content manager system | MetInfo CMS
Step 3 Connect the hard drive to the DVR System
MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS
Step 4 Turn on the dvr and check if it detects the hard drive.MAIN MENU---—INFO—----HDD INFO
Then, power off the system.
MetInfo enterprise content manager system | MetInfo CMS
Step 5 Fix the hard drive inside the box.

MetInfo enterprise content manager system | MetInfo CMS

Put screws on to fix the hard drive inside the box.

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS
Step 6 Put the cover back to position and install the screws. 
MetInfo enterprise content manager system | MetInfo CMS