Q17.How to connect DVR/NVR on computer software CMS?

CMS can help you to manage your DVR/NVR both locally and remotely. But before adding your DVR/NVR to CMS, 
please make sure you have connected your DVR/NVR to the Internet successfully. If you have problem, please click this link for help.

http://www.anran-cctv.com/support/shownews.php?lang=en&id=48

software for windows computer.

http://drive.google.com/open?id=0ByfQIIyKtetuMFpLcDM5MnVzMlE

Then you can follow the steps below to add NVR/DVR to your CMS.

1 Download CMS and install it on your computer according to the instruction in the download file.

2 Double click the icon MetInfo enterprise content manager system | MetInfo CMS  to open CMS, the default User Name is super, password is blank (no password).

 

MetInfo enterprise content manager system | MetInfo CMS

 

3 For the first time login, you will see the interface as below.      

MetInfo enterprise content manager system | MetInfo CMS

 

4 To add DVR/NVR, you can click System menu on the bottom right corner. Then go to Device Manager, click ADD AREA to create a zone. 

Name the zone yourself and click OK.

MetInfo enterprise content manager system | MetInfo CMS 

5 After adding area, click the area name you created then click on MetInfo enterprise content manager system | MetInfo CMS  to add your DVR/NVR.

Device Name: name it yourself

Login type: choose Cloud

Serial ID: Here is method to find Serial ID http://www.anran-cctv.com/support/shownews.php?lang=en&id=49

User Name/Password: default is admin and no password, same as your DVR

Click “ OK” after you have done above parameters, you could double click to open this device.

MetInfo enterprise content manager system | MetInfo CMS

 

6 After you add you DVR successfully, you can view and manage your DVR on CMS.

MetInfo enterprise content manager system | MetInfo CMSMetInfo enterprise content manager system | MetInfo CMS

 

7 Here is the introduction about the CMS interface.

MetInfo enterprise content manager system | MetInfo CMS

 

Note: If you have problem to add DVR/NVR to CMS, please double check the connection between 

your DVR/NVR and the Internet and upgrade your CMS to the latest version.