Q33.How to connect system with its IP address instead of SN by software CMS?

Here is CMS software for windows computer.

 http://www.anran-cctv.com/downloads/showdownload.php?lang=en&id=19

Then you can follow the steps below to add NVR/DVR to your CMS.

1. Plug DVR to router with network cable. Make sure the computer and DVR are connected to same router and in same network.

2.Download CMS and install it on your computer according to the instruction in the download file.

3 Double click the icon blob.png  to open CMS, the default User Name is super, password is blank (no password).

 

blob.png

 

4 For the first time login, you will see the interface as below.      

blob.png

 

5 To add DVR/NVRs, you can click System menu on the bottom right corner. Then go to Device Manager, click ADD AREA to create a zone. 

Name the zone yourself and click OK.

MetInfo enterprise content manager system | MetInfo CMS 

6 After adding area, click the area name you created then click on blob.png  to add your DVR/NVRs.

Device Name: name it yourself

User Name/Password: default is admin and no password, same as your DVR

Click “ OK” after you have done above parameters, you could double click to open this device.

 

blob.png

Tips: Make sure the gateway of DVR/NVRs IP is the same of your router’s.If the gateway of DVR/NVRs IP is different of your router’s,please click “EditDevice” to change the gateway of the DVR/NVRs IP as your router’s.

Example:If your router’s gateway IP is 192.168.0.1,and DVR IP address is 192.168.1.88.

So you have to change the IP address of DVR/NVRs to 192.168.0.88,subnet mask:255.255.255.0,gateway:192.168.0.1.

blob.png

7 After you add you DVR successfully, you can view and manage your DVR on CMS.

blob.png

Tips: If you have problem to add DVR/NVRs to CMS, please double check the connection between 

your DVR/NVR and the Internet and upgrade your CMS to the latest version.