Position:Home > Support > FAQ > PoE Camera Systems

Q42. How to upgrade POE camera?

There are two ways to set motion detection

Method A:

Set motion detection once again.

The NVR has closed the motion function of camera when you set motion in NVR. So you need to login the camera to open the motion function.

1. Connect the camera to the NVR and make sure your NVR connected to the same LAN as your PC.

2. Download the PC software “IPCTool”blob.png, open it, click “refresh”blob.png, it will find the camera which you connect to the NVR, double-click the IP that has been searched, then open the motion function once again, please follow the step as below picture shows.

The link of Software “IPCTool”.

http://www.anran-cctv.com/downloads/showdownload.php?lang=en&id=35

blob.png

blob.png

blob.png

Tips: Please attention, if you change the NVR motion setting again, the camera will be closed the motion function again. So please set the NVR motion, and then, open the camera motion.



Method B:

Upgrade camera

1. Connect the camera to the NVR and make sure your NVR connected to the same LAN as your PC.

2. Download the PC software “IPCTool” blob.png  , open it, click “refresh”blob.png, it will find the camera which you connect to the NVR.


The link of Software “IPCTool”.

http://www.anran-cctv.com/downloads/showdownload.php?lang=en&id=35


The link of POE camera upgrade file.

http://www.anran-cctv.com/downloads/showdownload.php?lang=en&id=36

blob.png

3. Choose the camera which you want to upgraded, then click “upgrade”blob.png , choose the upgrade file and click OK, the upgrade process takes 2 to 3 minutes.

blob.png

4. After successful upgrade you need click “Restore Default”blob.png  , then wait about 1 minutes and it will be ok.

blob.png